Spare Parts
Spindle Motors

Replace when cutting frequency pauses because the spindle
revolution is unstable or the torque is decreased. (The Life Expectancy is about 50 hours.)
RLP-IMOD-001 |
Pk of 2 Spindle Motors (inc pinion gear) |
£7.00 |
|
Controller Unit

Replace when any of the motors are not moving or the unit
fails to power on. Also solves possible communication port (USB) or DC Power connection problems.
RLP-IMOD-002 |
Controller Unit |
£495.00 |
|
Upper Unit

This includes the entire spindle (with collet) and X axis shaft
assembly. Complimentary Phillips screwdriver and flat-bedded screwdriver also included. (N.B. Individual parts within this complete unit are
available.)
RLP-IMOD-003 |
Complete Upper Unit |
£269.00 |
|
Bottom Unit

This
includes the Y-Axis drive and table assembly.
Complimentary Phillips screwdriver and flat-bladed screwdriver also included. (N.B. Individual parts within this complete unit are available.)
RLP-IMOD-004 |
Complete Bottom Unit |
£179.00 |
|
Z Drive Unit

Includes the spindle, collet, and slide holder base.
Replace if you encounter any unusual Z axis problems. Complimentary Phillips screwdriver and flat-bladed screwdriver also included. (N.B.
Individual parts within this unit are available.)
RLP-IMOD-005 |
Z-Axis Drive Unit |
£199.00 |
|
Y Drive Unit

Replace if you encounter any unusual Y axis problems.
Complimentary Phillips screwdriver and flat-bladed screwdriver also included. (N.B. Y-axis drive screw set is avilable separately.)
RLP-IMOD-006 |
Y-Axis Drive Unit |
£129.00 |
|
Z Drive Screw

Replace when the screw is worn or broken. Recommended
replacement after 500 hours of operation. (Complimentary Phillips screwdriver also included.)
RLP-IMOD-007 |
Pack of 2 Z-Drive Screws |
£29.00 |
|
X Drive Screw

Replace when the screw is worn or broken.
Recommended replacement after 500 hours of operation. (Complimentary Phillips screwdriver and flat-bladed screwdriver also included.)
RLP-IMOD-008 |
Pack of 2 X-Drive Screws |
£29.00 |
|
Y Drive Screw

Replace when the screw is worn or broken.
Recommended replacement after 500 hours of operation. (Complimentary Phillips screwdriver and flat-bladed screwdriver also included.)
RLP-IMOD-009 |
Pack of 2 Y-Drive Screws |
£29.00 |
|
Bearing Set

Includes 2 spindle bearings and washers (one 4.2mm
bore diameter, one 6.2mm diameter). Replace when the bearings are worn or broken. Recommended replacement after 500 hours of operation.
(Complimentary flat-bladed screwdriver also included.)
RLP-IMOD-010 |
Bearing Set |
£19.00 |
|
Spindle Holder Set

Includes a spindle holder and 2 contact terminals
which hold the spindle motor. Replace as needed. (Complimentary Phillips screwdriver also included.)
RLP-IMOD-011 |
Spindle Holder Set |
£14.00 |
|
Z Slide Holder Set

Replace as needed. (Complimentary Phillips
screwdriver also included.)
RLP-IMOD-012 |
Plastic Z-Axis Motor Mount |
£12.00 |
|
Rubber Parts Set

Includes 4 rubber feet for the base unit and 4 rubber cable
clamps. Replace as needed.
RLP-IMOD-013 |
Rubber Parts Set |
£9.00 |
|
Gear Set

Includes gears and nuts for X, Y & Z-Axis, ie., 1 nut, 1 orange
gear, 1 white gear, 3 brown gears, 6 green gears. Replace as needed.
RLP-IMOD-014 |
Gear Set |
£19.00 |
|
Table Set

Includes 3 replacement tables. Replace as needed.
RLP-IMOD-015 |
Table Set |
£19.00 |
|
Hook Set

Includes 8 hooks which hold the main upper assembly.
Replace as needed.
RLP-IMOD-016 |
Hook Set |
£15.00 |
|
Left Arm

Includes the left hand hinge for the main upper assembly. Replace if
damaged.
RLP-IMOD-017 |
Left Arm |
£19.00 |
|
Front/Rear Cover Set

Includes 1 clear Front Cover and 1 clear
Rear Cover. These are clear dust covers. Replace as needed.
RLP-IMOD-018 |
Front/Rear Cover Set |
£35.00 |
|
Top Cover

This is the plastic Top Cover which is on the Upper Unit. Replace
as needed.
RLP-IMOD-019 |
Top Cover |
£35.00 |
|
Base Unit

This is the plastic base only and does not include the table or any
Y-drive components. Replace as needed. (Complimentary Phillips screwdriver also included.)
RLP-IMOD-020 |
Base Unit |
£49.00 |
|
Side Cover

Includes 1 top and 1 bottom cover unit. Each cover is
interchangeable between the left and right hand side. Replace as needed.
RLP-IMOD-021 |
Side Cover |
£42.00 |
|
Cable Set

This is the entire set of cables which is connected to the boards,
sensors, and motors. Replace as needed. (The set includes: Sensor Cable, Y-Origin Sensor Cable, Z-Origin Sensor Cable, USB Cable, Power
Cable, Z Motor with cable.)
RLP-IMOD-022 |
Cable Set |
£27.00 |
|
Screw Set

This is a full set of screws used in the iModela. Replace as
needed. (The set includes 8 different types of screws, with a quantity of 10 each, ie., 80 screws in total.)
RLP-IMOD-023 |
Screw Set |
£9.00 |
|
Package Set

This is the full set of packaging, included the plastic case.
RLP-IMOD-024 |
Packaging Set |
£92.00 |
|
N.B. All spare part prices shown exclude VAT