Spare Parts

Replace when cutting frequency pauses because the spindle revolution is unstable or the torque is decreased.  (The Life Expectancy is about 50 hours.)

Replace when any of the motors are not moving or the unit fails to power on.  Also solves possible communication port (USB) or DC Power connection problems.

This includes the entire spindle (with collet) and X axis shaft assembly.  Complimentary Phillips screwdriver and flat-bedded screwdriver also included.  (N.B. Individual parts within this complete unit are available.)

This includes the Y-Axis drive and table assembly.  Complimentary Phillips screwdriver and flat-bladed screwdriver also included.  (N.B. Individual parts within this complete unit are available.)

Includes the spindle, collet, and slide holder base.  Replace if you encounter any unusual Z axis problems.  Complimentary Phillips screwdriver and flat-bladed screwdriver also included.  (N.B. Individual parts within this unit are available.)

Replace if you encounter any unusual Y axis problems.  Complimentary Phillips screwdriver and flat-bladed screwdriver also included.  (N.B. Y-axis drive screw set is avilable separately.)

Replace when the screw is worn or broken.  Recommended replacement after 500 hours of operation.  (Complimentary Phillips screwdriver also included.)

Replace when the screw is worn or broken.  Recommended replacement after 500 hours of operation.  (Complimentary Phillips screwdriver and flat-bladed screwdriver also included.)

Replace when the screw is worn or broken.  Recommended replacement after 500 hours of operation.  (Complimentary Phillips screwdriver and flat-bladed screwdriver also included.)

Includes 2 spindle bearings and washers (one 4.2mm bore diameter, one 6.2mm diameter).  Replace when the bearings are worn or broken.  Recommended replacement after 500 hours of operation.   (Complimentary flat-bladed screwdriver also included.)

Includes a spindle holder and 2 contact terminals which hold the spindle motor.  Replace as needed.  (Complimentary Phillips screwdriver also included.)

Replace as needed.  (Complimentary Phillips screwdriver also included.)

Replacement / optional extra spindles.

Includes 4 rubber feet for the base unit and 4 rubber cable clamps.  Replace as needed.

Includes gears and nuts for X, Y & Z-Axis, ie., 1 nut, 1 orange gear, 1 white gear, 3 brown gears, 6 green gears.  Replace as needed.

Includes 3 replacement tables.  Replace as needed.

Includes 8 hooks which hold the main upper assembly.  Replace as needed.

Includes the left hand hinge for the main upper assembly.  Replace if damaged.

Includes 1 clear Front Cover and 1 clear Rear Cover.  These are clear dust covers.  Replace as needed.

This is the plastic Top Cover which is on the Upper Unit.  Replace as needed.

This is the plastic base only and does not include the table or any Y-drive components.  Replace as needed.  (Complimentary Phillips screwdriver also included.)

Includes 1 top and 1 bottom cover unit.  Each cover is interchangeable between the left and right hand side.  Replace as needed.

This is the entire set of cables which is connected to the boards, sensors, and motors.  Replace as needed.  (The set includes: Sensor Cable, Y-Origin Sensor Cable, Z-Origin Sensor Cable, USB Cable, Power Cable, Z Motor with cable.)

This is a full set of screws used in the iModela.  Replace as needed.  (The set includes 8 different types of screws, with a quantity of 10 each, ie., 80 screws in total.)

This is the full set of packaging, included the plastic case.